Shower Upgrade 101 - Top Tips For New Unit Installation

View More

What're your opinions about How to Install a Freestand?

A successful shower installment needs mindful planning as well as a lot of job. In most cases, you will require to do three sorts of tasks: mounting walls, setting up the plumbing, and completing walls.

Prep work

Firstly, you need to pick the kind of shower that you desire to install. It is necessary to determine whether the picked shower is capable of handling particular systems and also can control a secure level of water with the central heating boiler. Most shower units nowadays are made to be adaptable to various water pressures (such as kept warm water and chilly keys).
It is also vital to take into consideration the water pressure as well as the preparation of the piping and water drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The hose as well as spray parts of the push-on mixer shower device can be connected to the bathroom faucet as per your need, and the water temperature can be readjusted via the faucets. Push-on mixers are cheap and also incredibly easy to mount. However, although the hose pipe link is simple, it is quickly displaced. Additionally, it is troublesome to readjust the temperature.

Bath/Shower Mixer: The hose pipe as well as spray of this sort of shower are combined with a bath mixer faucet, and also the temperature can be changed with the bathroom taps. It is a very affordable alternative and no additional plumbing is included. Nonetheless, the bath/shower mixers additionally deal with inconvenient temperature control options.

Manual Mixer: The hose and spray of a manual mixer shower system belong of the wall surface device and also the cold and hot water supplies are connected to a single valve The temperature and pressure of the water are controlled through either one or a selection of handles (in extra pricey showers). Although temperature level control is a lot easier in hands-on mixer types, they are much more expensive than the previously mentioned mixers. They also require added plumbing of cold and hot water pipes.

Thermostatic Mixer: The hose pipe and also spray of this shower kind belong of the wall surface system and the hot and cold water materials are linked to a single valve right here as well. It is complete with a built-in stabiliser to self-adjust the water temperature and to prevent it from becoming also warm. Among the largest benefits of a thermostatic mixer shower kind includes practical temperature control. However, it is the most expensive of the different mixer alternatives.

Power Shower: A power shower is a solitary device having an effective electrical pump that is capable of altering both the water stress as well as temperature. This sort of shower can be fitted if there is water from a cold water tank and a warm water cyndrical tube. A power shower makes the modification of both pressure and also temperature level easy. On the other hand, it disagrees for water heated up straight by the shower or where the water is provided by a combination central heating boiler under keys stress.

Electric Shower: An electric shower is plumbed right into a keys cold water supply and it warms the water electrically. It is very important to note that for this shower kind to be installed, the keys pressure requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature and stress to be changed through a knob. Versions with temperature stabilisers are much better as they stay unaffected by various other taps somewhere else in use within the family. A major downside of electric showers is that the control handle only permits the alternative of high temperatures at much less pressure, or reduced temperatures at a better pressure. This is bothersome in the winter season when the spray is usually weak as well as the keys water is colder. Nonetheless, this trouble is tackled in some versions which are offered with a winter/summer setting.

Technique

Depending on the type of shower you desire to install, the shower head have to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it must have a check shutoff.
Before beginning, it is recommended to note the positions of the shower head and also control, as well as to intend the pipe-work involved. In addition, the drainage system to eliminate the drainage will need to be intended. Both positions of the cord course and the shower switch will certainly also need to be thought about if a rapid or electrical shower system is being mounted.
Make use of the guideline overview supplied with the shower system to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is important to cut off the water supply. In order to safeguard the pipelines, they need to be given a waterproof covering and likewise fitted with separating shutoffs. The pipes can after that be hidden right into the wall as well as glued over to neaten the total appearance.
Fit the base tray, shower head, and also fittings.
Link the primary shower control to the pipelines that will certainly be providing the water (This might require a female screw thread adapter).
Reconnect the water system and test the pipelines for any type of leaks, as some might require tightening.
If you are installing an electrical shower, keep in mind to turn off the electricity supply prior to making any kind of electrical connections. As soon as these connections have been made (there ought to be advice within the instruction manual), the power supply can be switched back on.

Adjusting Water Pressure to Suit Your Shower

The cold water reservoir can be lifted to a better elevation (in some cases just 150mm (6inches)) by installation a solid wood assistance under it - perhaps composed of struts and also blockboards. If you select this choice, the major and also distribution pipelines will certainly additionally have to be raised to satisfy the new height of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it must be linked into the power supply in order to operate.

Piping and also Drain

It is best to make use of 15mm diameter supply pipelines, as well as make the runs to the shower as short and also straight as feasible so as to keep maximum stress as well as minimise warmth loss. Furthermore, by reducing making use of elbows for pipe edges, you can reduce the resistance in the flow of the supply of water. You can achieve this by bending the pipes instead.

Most Usual Errors

Breaching or ignoring local code constraints.

Using pipelines that are too small.

Affixing copper to galvanized without making use of a brass or dielectric suitable between both.

Not making use of tape or pipe compound at threaded joints.

Uneven your fixtures when installing them.

Not installing an air void filling up for fixtures.

Reducing supply stub outs as well short to mount the shutoff valves onto after the completed wall surface remains in place.

Not effectively lining up tubes into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will trigger a leak.).

When transforming the water back on in your house, constantly run the outdoors tube valve or purge your bathrooms to hemorrhage dirt and also air from the lines. This debris can create issues in your sink taps as well as various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed reading our excerpt on How to Install a Shower Enclosure . Thanks so much for taking a few minutes to read through our short article. You should take a moment to share this page if you liked it. Thanks for your time. Come back soon.

Schedule Service Now